Παρακαλώ χρησιμοποιήστε αυτό το αναγνωριστικό για να παραπέμψετε ή να δημιουργήσετε σύνδεσμο προς αυτό το τεκμήριο: https://hdl.handle.net/123456789/469
Τύπος: Διδακτορική διατριβή
Τίτλος: Dynamic vibration absorbers in civil engineering structures
Εναλλακτικός τίτλος: Δυναμικά συστήματα απορρόφησης ταλαντώσεων σε κατασκευές πολιτικού μηχανικού
Συγγραφέας: [EL] Καπασάκαλης, Κωνσταντίνος[EN] Kapasakalis, Konstantinossemantics logo
Επιβλέπων διατριβής: [EL] Σαπουντζάκης, Ευάγγελος[EN] Sapountzakis, Evangelossemantics logo
Συμβουλευτική επιτροπή: [EL] Αντωνιάδης, Ιωάννης[EN] Antoniadis, Ioannissemantics logo
[EL] Γκαζέτας, Γεώργιος[EN] Gazetas, Georgesemantics logo
Μέλος εξεταστικής επιτροπής: [EL] Καράμπαλης, Δημήτρης[EN] Karabalis, Dimitrissemantics logo
[EL] Ψυχάρης, Ιωάννης[EN] Psycharis, Ioannissemantics logo
[EL] Λαγαρός, Νικόλαος[EN] Lagaros, Nikossemantics logo
[EL] Σπιτάς, Βασίλειος[EN] Spitas, Vasiliossemantics logo
Ημερομηνία: 24/06/2020
Περίληψη: The scope of this dissertation concerns the mitigation of ambient vibrations, such as earthquakes and wind loads, in civil engineering structures. Specifically, three individual aspects are examined. The first deals with horizontal seismic protection of multi-story building structures, the second with vertical seismic protection, while the third deals with vibration absorption in wind turbine towers. The proposed dynamic vibration absorbers are based on the KDamper oscillator. The KDamper is a novel passive vibration isolation and damping concept, based essentially on the optimal combination of appropriate stiffness elements, including a negative stiffness element. The design of the KDamper-based absorbers follows an engineering-criteria driven optimization procedure, with proper constraints and limitations depending on the structure to be employed. The excitation input is selected according to the provisions of the codes with respect to the considered application. Finally, two alternative displacement-dependent configurations are proposed for the realization of the negative stiffness element, generating one and two-dimensional negative stiffness, respectively. The performance of KDamper is assessed with representative case studies, and its effectiveness is verified by comparisons with existing vibration absorption approaches found in the literature. On the basis of the obtained results, the KDamper-based dynamic vibration absorbers can provide a realistic alternative to the existing horizontal and vertical seismic isolation approaches, as well as provide viable retrofitting options for seismic protection. In addition, the feasibility of wind turbines is extended, as their dynamic performance is enhanced by increasing the effective damping of the wind turbine tower.
Γλώσσα: Αγγλικά
Τόπος δημοσίευσης: Αθήνα, Ελλάδα
Σελίδες: 413
Θεματική κατηγορία: [EL] Επιστήμη Πολιτικού Μηχανικού[EN] Civil Engineeringsemantics logo
Λέξεις-κλειδιά: seismic isolationnegative stiffnessseismic protectiondampingvibration absorptionKDampertuned mass damper
Κάτοχος πνευματικών δικαιωμάτων: Copyright © Kapasakalis A. Konstantinos, 2020 All rights reserved.
Διατίθεται ανοιχτά στην τοποθεσία: https://www.didaktorika.gr/eadd/handle/10442/48215
Σημειώσεις: Το έργο συγχρηματοδοτείται από την Ελλάδα και την Ευρωπαϊκή Ένωση (Ευρωπαϊκό Κοινωνικό Ταμείο) μέσω του Επιχειρησιακού Προγράμματος «Ανάπτυξη Ανθρώπινου Δυναμικού, Εκπαίδευση και Διά Βίου Μάθηση», στο πλαίσιο της Πράξης «Ενίσχυση του ανθρώπινου ερευνητικού δυναμικού μέσω της υλοποίησης διδακτορικής έρευνας» (MIS-5000432), που υλοποιεί το Ίδρυμα Κρατικών Υποτροφιών (ΙΚΥ).
Εμφανίζεται στις συλλογές:Υποψήφιοι διδάκτορες

Αρχεία σε αυτό το τεκμήριο:
Αρχείο Περιγραφή ΣελίδεςΜέγεθοςΜορφότυποςΈκδοσηΆδεια
PhD Kapasakalis final IKY.pdf17.01 MBAdobe PDF-ccbyncΔείτε/ανοίξτε